Sometimes, rather than giving a self-care advice to a friend, you can show up for them and that is the care they need.
HAMBURG, Germany — June 23, 2026 — The 67th edition of the TOP500 list of the world’s most powerful supercomputers was announced today at the ISC 2026 conference in Hamburg, Germany. LineShine, a previously unlisted system installed in China, debuts at No. 1, displacing El Capitan as the world’s most powerful supercomputer as measured by the High Performance Linpack (HPL) benchmark. The new list also reflects continued depth in U.S. and European exascale capability, a new entrant in Italy’s HPC fleet, and unchanged leadership atop the Green500 energy-efficiency ranking. LineShine Takes the No. 1 Position LineShine achieved 2.198 Exaflop/s on HPL — about 80 percent of its 2.736 Exaflop/s theoretical peak — making it the first system on the TOP500 to exceed two exaflops of sustained double-precision performance using CPUs only. Installed at the National Supercomputing Centre in Shenzhen (NSCS) and built by the Shenzhen Cloud Computing Center, the system is based on a custom Chinese processor and the “LingKun” platform: 13.79 million cores across 304-core LX2 processors running at 1.55 GHz, linked by the proprietary LingQi interconnect and running Kylin OS. LineShine draws approximately 42.2 megawatts of power, for an efficiency of 52.07 Gigaflops/Watt. Its debut marks the first time since 2017 that a Chinese system has led the TOP500, and it also takes over the No. 1 position on the HPCG ranking with 22.00 HPCG-Petaflop/s. On the HPL-MxP mixed-precision benchmark, LineShine reached 7.92 Exaflop/s for fourth place, a comparatively modest 3.6x speedup over its HPL score that points to a CPU-only design without dedicated low-precision accelerators. Five Systems Now Cross the Exascale Threshold LineShine’s debut increases the number of systems sustaining more than one exaflop/s on HPL from four to five and, for the first time, places exascale systems across Asia, North America, and Europe simultaneously. Rank System Site Country HPL (Exaflop/s) 1 LineShine National Supercomputer Center, Shenzhen China 2.198 2 El Capitan Lawrence Livermore National Laboratory United States 1.809 3 Frontier Oak Ridge National Laboratory United States 1.353 4 Aurora Argonne National Laboratory United States 1.012 5 JUPITER Booster Jülich Supercomputing Centre Germany 1.000 El Capitan, at Lawrence Livermore National Laboratory, drops to No. 2 but is otherwise unchanged at 1.809 Exaflop/s, 11.34 million cores, and 60.94 Gigaflops/Watt, built on the HPE Cray EX255a architecture with AMD 4th Gen EPYC CPUs and AMD Instinct MI300A accelerators. Frontier, at Oak Ridge National Laboratory, moves to No. 3 at 1.353 Exaflop/s, and Aurora, at Argonne National Laboratory, holds No. 4 at 1.012 Exaflop/s. JUPITER Booster, operated by the Jülich Supercomputing Centre under the EuroHPC Joint Undertaking, moves to No. 5 at exactly 1.000 Exaflop/s, remaining Europe’s only system above the exascale threshold on HPL. A New Entrant and a Reshuffled Top 10 Eni S.p.A.’s new HPC7 system enters the list directly at No. 6 with 571.5 Petaflop/s, built on the same HPE Cray EX255a / AMD Instinct MI300A architecture as El Capitan, and becomes the most powerful machine in Eni’s HPC fleet alongside its existing HPC6 system. Microsoft’s Azure-based Eagle system falls to No. 7 at 561.2 Petaflop/s, followed by HPC6 at No. 8 (477.9 Petaflop/s). Japan’s Fugaku holds No. 9 at 442 Petaflop/s, and Switzerland’s Alps system rounds out the Top 10 at No. 10 with 434.9 Petaflop/s. Finland’s LUMI and Italy’s Leonardo, No. 9 and No. 10 last edition, fall just outside the new Top 10 at No. 11 and No. 12, respectively. Architectural and Vendor Diversity in the Top 10 The June 2026 Top 10 illustrates an unusually high degree of architectural diversity, reflecting the increasingly heterogeneous nature of high-performance computing. The systems span custom Chinese architectures (LineShine’s LingKun processors and LingQi interconnect), AMD-based systems ranging from exascale (El Capitan and Frontier) to sub-exaflop performance (HPC7 and HPC6), an Intel-based exascale design (Aurora), NVIDIA Grace Hopper architecture (JUPITER Booster and Alps), Microsoft’s cloud-based Eagle system combining Intel Xeon processors with NVIDIA H100 accelerators, and Japan’s distinctive Fugaku system built around Fujitsu’s A64FX Arm processors. The list demonstrates that there is no single dominant technology path to leadership-class computing; instead, vendors are pursuing a variety of CPU, GPU, APU, and custom-accelerator approaches coupled with different interconnect and system designs. Looking at vendor representation, HPE is the dominant system integrator, supplying six of the ten systems (El Capitan, Frontier, Aurora, HPC7, HPC6, and Alps); Aurora runs on the HPE Cray EX platform but is credited to Intel as prime contractor. On the processor side, AMD has the strongest presence, powering four systems directly (El Capitan, Frontier, HPC7, and HPC6) and contributing more than 40 percent of the combined Top 10 HPL performance. NVIDIA technology appears in three systems (JUPITER Booster, Eagle, and Alps), while Intel is represented both as a complete platform vendor (Aurora) and through Xeon processors in Eagle. Eviden/Bull supplies the BullSequana XH3000 platform underlying JUPITER Booster, Fujitsu remains represented through Fugaku, and China’s Shenzhen Supercomputer Center enters the Top 10 with the custom-built LineShine system, demonstrating the emergence of a new indigenous exascale architecture. Overall, the Top 10 reflects a competitive landscape led by HPE integration expertise, AMD’s strong position in exascale computing, NVIDIA’s growing influence through AI-oriented accelerators, and continued innovation from national computing programs in China, Japan, Europe, and the United States. HPCG: LineShine Leads a Reordered Field On the HPCG benchmark, which measures performance on data-intensive, real-world application patterns rather than raw floating-point throughput, LineShine takes over the No. 1 position with 22.00 HPCG-Petaflop/s, ahead of El Capitan (17.41) and Fugaku, now third (16.00). Frontier holds fourth (14.05), Eni’s new HPC7 system takes fifth (5.95), and Aurora rounds out the top six (5.61). JUPITER Booster has not yet submitted an HPCG result. HPL-MxP: El Capitan Holds the Mixed-Precision Lead On the HPL-MxP benchmark, which measures mixed-precision performance, El Capitan remains the No. 1 system at 16.7 Exaflop/s, a 9.2x speedup over its standard HPL score. Aurora holds second place (11.6 Exaflop/s, 11.5x speedup) and Frontier holds third (11.4 Exaflop/s, 8.4x), while LineShine debuts in fourth at 7.92 Exaflop/s with a more modest 3.6x speedup, consistent with its CPU-only design. Further down the list, SoftBank’s CHIE-4 system posted the field’s largest gain at 24.4x over its standard HPL score. Green500: Same Top Three, Same Order, Six Months Later Energy-efficiency leadership is unchanged from the previous list. KAIROS, at CALMIP / University of Toulouse-CNRS in France, again ranks No. 1 on the Green500 at 73.28 Gigaflops/Watt (3.046 Petaflop/s on HPL), followed by ROMEO-2025 at the ROMEO HPC Center - Champagne-Ardenne, France (70.91 Gigaflops/Watt, 9.863 Petaflop/s) and the Levante GPU extension at DKRZ in Germany (69.43 Gigaflops/Watt, 6.747 Petaflop/s). All three share an identical BullSequana XH3000 architecture built on Grace Hopper Superchips and Quad-Rail NVIDIA InfiniBand NDR200; their order reflects system size, since smaller installations of identical technology consistently edge out larger ones on efficiency. Together, the new list illustrates a high-performance computing landscape that is more geographically and architecturally diverse than ever — spanning custom national silicon, GPU-accelerated U.S. Department of Energy systems, and Europe’s sovereign computing infrastructure. About the TOP500 List The TOP500 project began in 1993 as a one-time exercise for a small conference in Mannheim, Germany, followed by a second list compiled later that year for the SC93 conference in the United States. Comparing the two editions revealed how valuable the resulting statistics were, and the project has continued ever since, publishing an updated ranking of the world’s most powerful computer systems every June and November.
Two AI landing pages, same prompt. One cost a few cents, the other around 5x more. Can you tell which? Most people can't.
What are some alts that are going to perform well next bull cycle ? Keen to hear your thoughts 👍 submitted by /u/Extreme_Exam7914 [link] [Kommentare]
A few weeks ago I made a post about how coinbase froze my account after a $100K deposit. They finally unfroze my account claiming "There were a lot of transactions that day and it was automatically triggered " Some BS if you ask me. Because you are literally an exchange meant to handle that much transactions freeze my account for no reason. I finally send all to my bank and ledger ASAP but my question is...if exchanges do that how can I send my money to fiat and spend it? How can I spend my money if they can freeze it as soon as I try to send it to my bank? For clowns saying I should wait for FBI knocking on my door. Do you think I can be smart to make almost a million and fuck it all by spilling all I have to the cops? Some people are smarter than your reach and that is why we use crypto. Mixing that shit af. submitted by /u/klandreneau [link] [Kommentare]
- chase: third-person view of the humanoid walking to the goal - POV cam: the robot's onboard RGB, with the planner overlay (🟢 global A* path, 🔴 immediate move) - metric depth: Depth-Anything 2's per-pixel depth - occupancy map: top-down log-odds grid being built live-> white=free, red=obstacle+inflation, green dot=robot, blue=goal, green line=A* path The robot starts with no map. It draws one as it walks, steering around furniture to reach a goal in the next room. This is a monocular-vision stack for perception, mapping, and navigation: Depth-Anything-V2 turns each RGB frame into metric depth, visual-inertial odometry (VIO) fuses that depth with the IMU for pose, the two build a live occupancy map, and an A*/DWA planner walks the robot to the goal. What would make this more close to reality? Curious to know what tends to break first when a stack like this moves onto hardware. submitted by /u/airwarmedd [link] [Kommentare]
Is this the Move-37 moment for flooring? I know, this machine is engineered for this job and probably needs close to perfect conditions to work, hence lacking the "creativity" of AlphaGo. But still, don't look where we are today, but 2 more machines down the line. Seems frightening for flooring installers at least. submitted by /u/LatentSpaceLeaper [link] [Kommentare]
In the following, we'll examine whether measuring general capabilities is a good strategy when trying to reduce existential AI risk...
Keep seeing two completely different takes on the 0 cost basis 1099-DA thing and honestly can't tell which is right. Some people treat it like a non-event, you just attach your real basis and move on. Then there's a steady stream of posts with CP2000 notices for gains they never made, saying it wrecked their spring. Not in the US myself so I'm just trying to get the actual shape of it before I assume it's as bad as it looks. For anyone who's already had a notice or a 1099-DA that was obviously wrong, which was it for you, annoying but fixable or an actual nightmare to unwind. submitted by /u/Educational_Cable405 [link] [Kommentare]
Get viral videos in minutes with AI-powered hooks, silence cuts, captions, and pacing that turn raw footage into publish-ready edits fast.
I work from a big corner desk and part of the space on that desk is taken up by a small TV positioned in the corner. I use it occasionally and, for the longest time, it's had a Roku stick attached to it. It's reliable, but the UI has been filled with more and more cruft when all I ever want to do is launch Jellyfin.
（Translating this interesting Japanese post into English for the community! [Repost/Translation] Original link provided at the end.） We are diving right into microcontroller-based control today to explore some new IMU sensors for the Mini Pupper. Here is the breakdown: Table of contents BNO055 Integrating the BNO055 into Mini Pupper Key Notes Party Trick Time! Conclusion BNO055 Previously, I used the ATOM Matrix for control and had fun experimenting with attitude control using its built-in MPU6886 IMU sensor. My goal was to track the Yaw angle (rotation around the gravity axis) so the robot could keep facing the same direction even when the floor beneath it rotated. However, the MPU6886 suffered from significant Yaw drift, forcing me to abandon that approach. In this post, I’m switching to a different IMU sensor to finally achieve accurate Yaw control. To be fair, it's no surprise that a 6-axis IMU like the MPU6886 struggles with Yaw. That said, even with another 6-axis sensor like the MPU6050, you can actually get a relatively low-drift Yaw angle after a proper offset calibration. I could have gone with the MPU6050, but I decided to try out the BNO055 9-axis IMU sensor instead. Honestly, while the internal processing of the BNO055 is a bit of a black box, it delivers highly accurate attitude angles. You can get precise orientation data right out of the box without any tedious calibration or manual compensation using this sample code. Integrating the BNO055 into Mini Pupper I could have simply added the BNO055 to my previous ATOM Matrix setup. However, adding an extra IMU to a board that already integrates an MPU6886 felt way too redundant, and I just couldn't accept it. So, I opted for the ATOM Lite as the controller instead. BNO055 Circuit Board Key Notes While the BNO055 communicates via I2C, I ran into an issue where using M5Atom.h from the M5Stack Arduino library prevented me from mapping custom I2C pins for the Adafruit_BNO055 library. https://preview.redd.it/obc4fr764r8h1.png?width=1196&format=png&auto=webp&s=72d581213069e44203c269b73a8353f036312c93 To bypass this, I skipped the M5Stack library entirely and programmed the ATOM Lite using the standard ESP32 Arduino framework instead. This allowed me to freely specify the I2C pins, and communication with the BNO055 worked flawlessly. In this setup, I assigned Wire.begin(25, 21) for the BNO055 and Wire1.begin(22, 19) for the PCA9685 servo driver. I can confirm that everything runs perfectly without any issues! Reading attitude data with the BNO055, controlling the servos with the PCA9685, and lighting up the NeoPixels —— I've finally built my ideal board! Party trick Time! Thanks to the BNO055, I can now get highly accurate orientation angles. No Kalman filtering or complex algorithms needed—I just used the raw angle data straight from the sensor. The BNO055 is a beast and made this incredibly easy. I tested out the Yaw-based turn control to keep the robot locked onto a single heading while rotating. The longed-for Mini Pupper party trick Looks great! The walking gaits I programmed earlier are also working perfectly. ATOM Lite version Mini Pupper is also doing very well Even when the floor is tilted, parallel control based on foot height is smoothly achieved using only the attitude angle P control of BNO055. Conclusion I had a blast using the BNO055 9-axis IMU sensor to control the Mini Pupper. The BNO055 is honestly a game-changer—it finally allowed me to bring my dream Mini Pupper party trick to life! It's incredibly rewarding to watch this little robot get smarter and smarter. I'll definitely keep learning and experimenting! Original Japanese Post Original X Post #1 (Media) Original X Post #2 (Media) Original X Post #3 (Media) Original X Post #4 (Media) submitted by /u/Designer-Cricket7504 [link] [Kommentare]