Link preview
I built a standalone Raspberry Pi 5 pod to bring a cloud-dependent robot back to life
Moxie is a beautifully designed social robot, but it also became a good example of one of the biggest problems with cloud-dependent consumer robotics. When the original cloud services were shut down, much of the robot’s functionality disappeared, even though the hardware itself was still perfectly usable. The OpenMoxie community created a way to run Moxie again using a local server. However, the standard setup normally requires a computer to stay connected, so I wanted to build something more compact and self-contained. I designed the OpenMoxie Pod, a standalone enclosure containing: Raspberry Pi 5 Geekworm X1205 UPS HAT Two LiPO batteries Transparent PETG light pipes for the power and battery indicators Physical power button, ventilation and cable routing The enclosure was designed in Autodesk Fusion, 3D printed, filled, sanded and painted to match Moxie’s original colour. The goal was to create something that could sit next to the robot and behave more like a dedicated piece of hardware rather than a temporary Raspberry Pi setup. This project made me think a lot about the long-term sustainability of connected robots. When the cloud disappears, the robot should not automatically become electronic waste. I documented the complete design, printing, finishing, assembly and testing process here: Video: https://youtu.be/zTcgEC35IKY?si=6yry3L8-WT_WVcjY I’m not affiliated with the original Moxie creators or its current owners. This is an independent fan project built around the OpenMoxie community software. I’d be interested to hear what other approaches people have used to preserve or revive cloud-dependent robots. https://preview.redd.it/hnsqiahq0ddh1.png?width=2560&format=png&auto=webp&s=98b00d294d76444d40323deb3875e224ad9297e1 submitted by /u/daxx2k [link] [Kommentare] reddit.com · reddit.com
Moxie is a beautifully designed social robot, but it also became a good example of one of the biggest problems with cloud-dependent consumer robotics. When the original cloud services were shut down, much of the robot’s functionality disappeared, even though the hardware itself was still perfectly usable. The OpenMoxie community created a way to run Moxie again using a local server. However, the standard setup normally requires a computer to stay connected, so I wanted to build something more compact and self-contained. I designed the OpenMoxie Pod, a standalone enclosure containing: Raspberry Pi 5 Geekworm X1205 UPS HAT Two LiPO batteries Transparent PETG light pipes for the power and battery indicators Physical power button, ventilation and cable routing The enclosure was designed in Autodesk Fusion, 3D printed, filled, sanded and painted to match Moxie’s original colour. The goal was to create something that could sit next to the robot and behave more like a dedicated piece of hardware rather than a temporary Raspberry Pi setup. This project made me think a lot about the long-term sustainability of connected robots. When the cloud disappears, the robot should not automatically become electronic waste. I documented the complete design, printing, finishing, assembly and testing process here: Video: https://youtu.be/zTcgEC35IKY?si=6yry3L8-WT_WVcjY I’m not affiliated with the original Moxie creators or its current owners. This is an independent fan project built around the OpenMoxie community software. I’d be interested to hear what other approaches people have used to preserve or revive cloud-dependent robots. https://preview.redd.it/hnsqiahq0ddh1.png?width=2560&format=png&auto=webp&s=98b00d294d76444d40323deb3875e224ad9297e1 submitted by /u/daxx2k [link] [Kommentare]
Comments